Removing All Images from a Photobook
●
Following the procedure in "Choosing
a Selection Method" ( = 116), choose
[Clear All Selections] and press the [ ]
button.
●
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Still Images
Movies
Before using an Eye-Fi card, always confirm that local use is permitted
( = 2).
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card's user
manual or contact the manufacturer for instructions on preparing and
using cards or resolving transfer problems.
Using an Eye-Fi Card
●
When using an Eye-Fi card, keep the following points in mind.
-
Cards may continue to transmit radio waves even when [Eye-
Fi trans.] is set to [Disable] ( = 118). Remove the Eye-Fi
card before entering hospitals, aircraft, or other areas where
transmission is prohibited.
-
When troubleshooting image transfer issues, check the card
and computer settings. For details, refer to the card's user
manual.
-
Poor Eye-Fi connections may cause image transfer to take a
long time, and transfer may be interrupted in some cases.
-
Eye-Fi cards may become hot, due to their transfer functions.
-
Battery power will be consumed faster than in normal use.
-
Camera operation may become sluggish. To resolve this, try
setting [Eye-Fi trans.] to [Disable].
Before Use
Basic Guide
Still Images
Movies
Advanced Guide
1
2
3
4
5
6
7
8
9
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Setting Menu
Accessories
Appendix
117