Notes - Panasonic Viera TC-L42E30H Operating Instructions Manual

42” class 1080p lcd hdt
Table of Contents

Advertisement

Available languages

Available languages

Caution
This appliance is intended for use in tropical climates
When cleaning the TV, remove the mains plug
Cleaning an energised TV may cause electrical shock.
When the TV is not going to be used for a long period of time, remove the mains plug
This TV will still consume some power even in the Off mode, as long as the mains plug is still
connected to a live socket outlet.
Transport only in upright position
Allow sufficient space around the TV for radiated heat
Minimum distance
10
10
10
10
(cm)
Do not block the rear air vents
Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or electrical
shock.
Do not apply strong force or impact to the display panel
This may cause damage resulting in injury.

Notes

Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• [Off Timer] is active in the Setup Menu (p. 14)
• no operation is performed for the period selected in [Auto Standby] (p. 28)
Keep the TV away from these types of equipment
Electronic equipment
In particular, do not place video equipment near the TV. Electromagnetic interference may distort
images / sound.
Equipment with an infrared sensor
This TV also emits infrared rays. This may affect operation of other equipment.
When you insert the main plug into the socket outlet, the TV is in the same
condition as the last time you pulled the plug out as follows.
last time: TV off (standby mode)
the TV will be in the standby mode.
last time: TV on
the TV will be turned on (skip the standby mode)
When using the pedestal, keep the space between the bottom of the TV
and the surface where the TV is set.
If using a Wall-hanging bracket, refer to its manual.
5

Advertisement

Chapters

Table of Contents
loading

Table of Contents