Panasonic Viera TC-L42E30H Operating Instructions Manual page 27

Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Eco Navigation
Child Lock
ANT in
• Cable
• Antenna
Favourites Edit
Channel List
Auto Tuning
Manual Tuning
Update Channel List Updates the channel list while keeping your settings (Digital TV mode) (p. 31)
New Channel Message
• Off
• On
Signal Condition
OSD Language
• English
• Portuguese
• Spanish
Input Labels
Banner Display
Timeout
• 0 (No display)
• 1 / 2 / 3 / 4 / 5 / 6 /
7 / 8 / 9 / 10 seconds
Playing Time
Display
• Off
• On
VIERA Link
• Off
• On
Power on Link
• Off
• On
Power off Link
• Off
• On
Standby Power
Save
• Off
• On
Intelligent Auto
Standby
• Off
• On (With reminder)
• On (No reminder)
Network Setup
Sets the time until the TV automatically goes into Standby mode
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
Locks a channel / AV input to prevent access to it (p. 33)
Select Antenna input type ([Cable] / [Antenna])
•
All tuning data will be erased.
Creates a list of favourite channels (Digital TV mode) (p. 30)
Skips the unwanted channels or edits channels (p. 30, 32)
Sets all Digital TV or Analogue TV channels automatically (p. 31, 32)
Sets the TV channels manually (p. 31, 32)
Selects whether to give a notification message when a new channel is
found (Digital TV mode) (p. 31)
Checks the Digital TV signal condition (p. 31)
Changes language for on screen displays
Labels or skips each input terminal (p. 34)
Sets how long the information banner stays on screen (p. 15)
Sets to [On] to display a continuous record of time spent using Game
mode every 30 minutes
•
This function is available when [Game] is selected in [Viewing Mode]
(p. 23).
Sets to use VIERA Link functions
•
VIERA Link functions become available when [VIERA Link] is set to
[On] (p. 56).
Sets to use Power on Link functions (p. 56)
Sets to use Power off Link functions (p. 56)
Controls the power consumption in Standby mode of the connected
equipment to reduce the power consumption (p. 56)
•
This function is available when [VIERA Link] is set to [On] and [Power
off Link] is set to [On].
Makes non-watched or non-used connected equipment go into Standby
mode to reduce the power consumption (p. 56)
•
This function is available when [VIERA Link] is set to [On].
Sets the network setting to use in your network environment (p. 48)
[On (No reminder)]
27