Noritz NRC98-OD Installation Manual page 27

Installation
1. Apply Wall Packing to the rear side of the
remote controller.
2. Connect the remote controller wires to the
separate remote controller cord.
Wall Packing
(take off the paper)
Remote Controller Cord
3. Remove the cover of the remote control,
4. Insert the wall anchors, screw the remote
Remote
Control
Wires
Rear Side of
Remote Controller
mark the location of the screw holes, and
drill holes for the wall anchors.
control to the wall and replace the cover.
Wall Anchor
Phillips Roundhead
Wood Screw
27