Batteries & Charger; Charger Features; Operation Instructions - Active Care Medical Cobalt Owner's Manual

Before using your power mobility product for the first time, you will need to charge your batteries for 8 –
10 hours to ensure that they are fully charged.
Suggestion
ActiveCare Medical recommends that frequent users of their power mobility products
charge their batteries overnight, 8 – 10 hours, to make certain they have a full charge
each day.
Suggestion
ActiveCare Medical recommends that infrequent users of their power mobility product
charge their batteries once a week for 8 – 10 hours.
ActiveCare Medical's battery chargers, specific to our product, are designed to not overcharge the
batteries. You may leave your power mobility product plugged into the charger for longer than 8 – 10
hours without causing damage to the batteries.
In some instances ActiveCare Medical's battery charger may show two green lights indicating that the
batteries are fully charged—this is not always the case. A good rule of thumb is to charge your batteries
8 – 10 hours before each use to ensure that your power mobility product has a full charge.

CHARGER FEATURES

1. Ensures the battery connection automatically.
2. Monitoring all procedures until the battery is fully charged.
3. For protecting exhausted batteries, slow charge starts in the beginning then fast charge until it
goes up to the normal voltage.
4. Compact, portable and light-weight.
5. Approvals: UL, CSA, CE, TUV, JAPAN (T-mark)
CHARGER OPERATION INSTRUCTIONS
Please follow these steps:
1. Select the correct input voltage (115/230V) on the 115/230V
option switch.
2. Assure charging on lead-acid batteries only.
3. Keep the AC power switch off until the battery and charger have
been connected.
4. Make sure the output end of the charger corresponds with the
positive/negative pole of battery.
5. Turn on the AC power switch to "I" (the fan should begin to run).
Cobalt/ Cobalt X23 Owners Manual
Batteries & Charging
18