JVC KD-G110 Service Manual page 8

QQ
3.1.4 Removing the side panel 3 7 63 1515 0
(See Fig.4)
Reference:
Remove the front panel assembly as required.
(1) Remove the screw B and two screws C attaching the side
panel on the left side of the main body.
(2) Remove the side panel from the main body.
3.1.5 Removing the rear bracket
(See Fig.5)
• Remove the bottom cover.
(1) Remove the three screws D, three screws E and two
screws F attaching the rear bracket on the back side of the
main body.
(2) Remove the rear bracket.
3.1.6 Removing the main board
(See Figs.5 and 6)
• Remove the front panel assembly, bottom cover and side pan-
el.
Reference:
Remove the front chassis assembly as required.
TE
L 13942296513
(1) Remove the three screws D attaching the rear bracket on
the back side of the main body. (See Fig.5.)
(2) Remove the two screws G attaching the main board. (See
Fig.6.)
(3) Disconnect the connector
the main body and take out the main board with the rear
bracket. (See Fig.6.)
Reference:
Remove the rear bracket from the main body as required. (See
"3.1.5 Removing the rear bracket".)
www
.
1-8 (No.MA121)
http://www.xiaoyu163.com
CN501 on the main board from
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
B
C
Side panel
Rear bracket
E
Q Q
3 6 7 1 3 1 5
D
CN501
G
Rear bracket
co
.
9 4 2 8
C
Fig.4
F E F
0 5 8 2 9 9 4 2 8
D
Fig.5
Main board
G
Fig.6
m
9 9
9 9