Troubleshooting - Consumer Cellular Wireless Home Phone Base Manual

27

TROUBLESHOOTING

Problem
no dIal tone
no Caller Id name
Possible Solution
Make sure there is AC power to the Wireless Home Phone Base.
Do not connect to an AC outlet controlled by a wall switch.
• Move the device to an area with sufficient network signal
(Green or Yellow Signal Indicator light).
• Make sure your home telephone equipment has power
and is connected properly to the Wireless Home Phone Base.
• Check that the Signal Indicator light is illuminated.
If not, make sure the "On/Off" button on the back
of the device is "On" (press and hold until the
Signal Indicator light illuminates).
• Like all wireless services, only the calling number is displayed
with Caller ID.
• Your home phone equipment may support the display
names stored in its contacts memory.