Table of Contents
Advertisement
USING YOUR DEVICE (CONTINUED)
Calling (continued)
Call Waiting
You will hear two tones if someone calls while you
are already on a call.
To hold the current call and accept the waiting call,
press the Flash (or Talk) key. You can press the Flash
(or Talk) key anytime to switch back and forth
between calls.
To clear the current call and accept the waiting call,
enter 1 and press the Flash (or Talk) key. To reject
(User Busy) the waiting call, enter 0 and press the
Flash (or Talk) key.
Notes:
• The Wireless Home Phone Base comes with
standard three-way calling and call waiting.
Operation of these features will vary depending
on your home phone equipment.
• If your phone does not have a Flash (or Talk) key,
then use the off-hook mechanism supported by
your phone.
18
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Wireless Home Phone Base and is the answer not in the manual?
Questions and answers
How do i access my messages remotely
To access voicemail messages remotely on the Consumer Cellular Wireless Home Phone Base, dial your home phone number from a phone not connected to the base. Then follow the voice prompts to listen to and manage your messages.
This answer is automatically generated
Change number of rings on my verve home base
To change the number of rings, set your answering machine to pick up calls in fewer rings than the voicemail service, which is set to five (5) rings by default. The number of rings on the voicemail service itself cannot be changed from the device.
This answer is automatically generated