4. Have a second person hold the console assem-
bly near the Uprights (91, 92).
Connect the Upright Wire (93) to the Console
Wire (114). See the inset drawing. The con-
nectors should slide together easily and
snap into place. If they do not, turn one con-
nector and try again. IF YOU DO NOT CON-
NECT THE CONNECTORS PROPERLY, THE
CONSOLE MAY BECOME DAMAGED WHEN
YOU TURN ON THE POWER. Remove the wire
tie from the Upright Wire. Insert the connectors
down into the Right Upright (92).
5. Insert the brackets on the Handrail (110) into the
Uprights (91, 92). Make sure that no wires are
pinched.
4
Console
Assembly
114
93
5
Console
Assembly
110
8
91
114
93
Wire
Tie
91
92
110
92