Table of Contents
Advertisement
LED: The SR6000S uses five (5) indicator LED's including Flow, ORP Alarm, ORP Feed,
pH Alarm and pH Feed.
BUTTONS:
The SR6000S includes five (5) buttons for accessing and changing all
parameters.
MEMORY: In case of power loss the SR6000S shall retain all programmed values. The
values are protected for at least five (5) years without having power applied.
SECURITY: The SR6000S has a password feature to disable the buttons remotely and on
sight.
ALARMS: If the pH or ORP is more than 5% away from set point for 10 minutes or more
the SR6000S will light the LED alarm LEDS.
BUILT IN CHEMICAL FEEDERS: Two 24 volt chemical feed pumps are built onto the
sides of the SR6000S for ease of use and installation.
SENSORS:
The SR6000S directly measures pH and ORP.
Each sensor has its own
isolated circuitry for direct measurement, without the need for addition hardware of
electronics.
VOLTAGE: The SR6000S includes a selector switch to select the input voltage of 110 or
220 VAC (single or two phase). Both the line and neutral voltages are fused at 5A; the
relay power is routed through a 1A fuse.
S
-R
I
& O
G
TA
ITE
NSTALLATION
PERATION
UIDE
5
Advertisement
Table of Contents
