Device Drivers
Microsoft Windows NT 4.0, Windows 95 OSR2.x* and Windows 98
A generic Microsoft ATAPI device driver is built into the operating system. The LS-
120 will be automatically recognised and configured. No additional drivers are
required.
Windows NT 3.51
Windows NT 3.51 Service Pack 5 is an upgrade package available from Microsoft
(Web site or CD) which includes native driver support for LS-120.
Windows 95 (except OSR2.x)*
Run the installation program SETUP.EXE from the Device Driver installation disk.
The Setup program will install appropriate drivers and LS-120 format utility for your
environment.
Windows 3.x and MS-DOS
Run the installation program INSTALL.EXE from the Device Driver installation disk.
MS-DOS drivers and the LS-120 format utility will be installed.
OS/2 Warp Versions 3 and 4
An OS/2 Warp driver is available for download from the IBM web site at:
http://service.software.ibm.com/os2ddpak/html/removabl/mitsubis/index.htm
Run the file to decompress it. Refer to the README.1ST file included with the driver
for installation instructions.
Other
LS-120 support is provided by:
Linux from kernel version 2.0.31 with pre-patch 2.0.31-3.
FreeBSD release 2.2.6 or later supports the LS-120.
* See note on following page.
Mitsubishi Electric Australia Pty Ltd
7