Boss 36 BHP PISTON Service And Maintenance User Manual page 9

Safety
Never disable, override, or remove safeties, either temporarily or permanently.
Connect air hoses only in full compliance with OSHA Standard 29 CFR
1926:302 (b)(7). The required safety devices (velocity fuses) should be tested
in accordance with their manufacturer's recommendations to verify that they
reduce pressure in case of hose failure and will not nuisance trip with the hose
and tool combinations in use. Failure to comply could result in personal injury
or death and/or damage to equipment and property.
Never leave the machine running unattended or leave a tool connected to an
air hose when not using. Relieve system of all stored air pressure after use.
Never adjust the pressure switch to a setting of greater than 150 PSI. Oper-
ating the compressor at greater than 150 PSI may result in personal injury and
property damage.
Mount the compressor in a stable location capable of supporting 180 lbs.
Slight vibration may occur during operation and the machine may move if not
securely mounted.
When using tools, maintain secure footing at all times. Do not overreach or
awkwardly use air tools.
Prior to moving vehicle to the next work site, drain the air tank. To prevent
the collection of water in the tank drain daily.
Use only Boss approved replacement parts.
9 309150