Tuner Setting - JVC Model HR-XVC1UJ User Manual

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to
the next channel set into memory, skipping over unwanted channels. Before selecting channels, they
must be programmed into the DVD/VCR's memory. In addition to normal VHF and UHF channels, this DVD/
VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
TV
VCR DVD
DVD MENU MARKER RETURN
DISPLAY A.TRK C.RESET
SUB TITLE ANGLE
SP/EP
PLAY
ZOOM TITLE
MODE
0
TIMER TV/VCR
PLAY
STOP
SKIP
/INDEX
ENTER/
SET
SELECT
SET UP
MENU
VCR/DVD/TV
NOTE:
You can not select "CH SET UP" if you
set the channel to "L".
Preparation:
•
POWER
•
TV/CATV Selection
1
OPEN/
CLOSE
ZERO RETURN
2
SEARCH
MODE
REPEAT
A-B
TV
POWER
INPUT
3
TV VOL
SKIP
/INDEX
4
SET
CANCEL
Setting channels automatically
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
1
2
Turn ON the TV and set it to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light.)
Press SETUP MENU. The VCR menu screen will appear.
Press or to select CH SET UP, then press ENTER.
Press or to select the "TV/
CATV" option.
Then press ENTER to select the
TV or CATV mode. The arrow
indicates the selected mode.
TV - VHF/UHF channels
CATV - CABLE TV channels
Press SETUP MENU until the menu screen is cleared.
Repeat above step 1 and press
or to select AUTO CH
MEMORY.
Then press ENTER.
The auto tuning will start. The
channel display will count up and
when finished, the screen returns
to normal.

Tuner Setting

CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
CH 002
19