Zooming; Locating Desired Scene - JVC Model HR-XVC1UJ User Manual

TV
VCR DVD
DVD MENU MARKER RETURN
DISPLAY A.TRK C.RESET
SUB TITLE ANGLE
SP/EP
PLAY
ZOOM TITLE
MODE
0
TIMER TV/VCR
PLAY
STOP
SKIP
/INDEX
ENTER/
SET
SELECT
SET UP
MENU
VCR/DVD/TV
NOTES:
• You can use the Pause, Slow, Search
or Skip feature in the zoom mode.
• In case of the Video-CD playback with
PBC, the SEARCH MODE does not
work.
Zooming / Locating Desired Scene
Preparation:
• Turn ON the TV and set it to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light.)

Zooming

POWER
This unit will allow you to zoom in on the frame image. You can
then make selections by switching the position of the frame.
1
OPEN/
CLOSE
ZERO RETURN
SEARCH
MODE
2
REPEAT
A-B
TV
POWER
INPUT
3
TV VOL

Locating Desired Scene

Use the title, chapter and time recorded on the disc to
locate the desired point to play back.
SKIP
/INDEX
To check the title, chapter and time, press OSD. (see page 52)
1
SET
CANCEL
2
3
4
Press ZOOM during playback.
The center part of the image will
be zoomed in.
Each press of ZOOM will change
the ZOOM 1
(x 1.3), 2 (x 1.5) and
2.0).
Press / or /
You may move the frame from the center position to UP, DOWN,
LEFT or RIGHT direction.
In the zoom mode press ZOOM repeatedly to return to a 1:1
view ( Off).
Press SEARCH MODE during
playback or stop mode.
Press or to select the "Time", "Title" or "Chapter".
Press Number keys to change the number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
Press ENTER.
Playback starts.
• When you change the title, playback starts from Chapter 1 of
the selected title.
• Some discs may not work in the above operation.
1
3 (x
to view a different part of the frame.
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump
39