Maintenance - JVC PC-X290 Instructions Manual

Maintenance

To get the best performance of the unit, keep your discs, tapes, and mechanism clean.
Handling discs
• Remove the disc from its case by
holding it at the edge while pressing the
center hole lightly.
• Do not touch the shiny surface of the
disc, or bend the disc.
• Put the disc back in its case after use to
prevent warping.
• Be careful not to scratch the surface of
the disc when placing it back in its
case.
• Avoid exposure to direct sunlight,
temperature extremes, and moisture.
To clean the disc
Wipe the disc with a soft cloth in a
straight line from center to edge.
DO NOT use any solvent—such as conventional
record cleaner, spray, thinner, or benzine—to
clean the disc.
Handling cassette tapes
• If the tape is loose in its cassette, take
• If the tape is loose, it may get
• Be careful not to touch the tape
• Avoid the following places to store the
– 19 –
up the slack by inserting a pencil in
one of the reels and rotating.
stretched, cut, or caught in the
cassette.
surface.
tape:
– In dusty places
– In direct sunlight or heat
– In moist areas
– Near a magnet