Connection - Mvix MvixPVR User Manual

Composite Output Device Connection to Video In (Video IN)
<IP Set Top Box or Other Digital Set Top Box
>
IPTV Set Top Box Input Device Connection
Only composite connection input is possible. Therefore, composite
input terminal must be connected to Mvix in the set top box. In set top
box, connect yellow cable for video signal as well as red and white
cables for audio signal output. Then, to A/V INPUT terminal at the
back of Mvix, connect yellow, red and white cables accordingly.
Bypass Support (Composite => Power Off => Composite)
Even when Mvix power is turned off, signals sent into A/V Input are still
transmitted. Bypass function of MvixPVR can be activated only when
using composite input and output. If Mvix power is on, all outputs to
HDMI/ component/ composite are supported.
Unicorn Information System