Related Manuals for Stealth LIGHTNING PUSHCHAIR
Summary of Contents for Stealth LIGHTNING PUSHCHAIR
- Page 1 USER & WORKSHOP MANUAL FOR LIGHTNING PUSHCHAIR User and Workshop Manual for the Lightning Pushchair Page 1 of 25...
-
Page 2: Table Of Contents
Attaching and Removing the Tray 11.0 CLEANING 12.0 MAINTENANCE 13.0 REPAIR 13.1 Front Wheel Assembly 13.2 Rear Wheel Assembly 13.3 Replacing/Removing the Back Upholstery 13.4 Replacing/Removing the Seat Upholstery 14.0 WARRANTY User and Workshop Manual for the Lightning Pushchair Page 2 of 25... -
Page 3: Safety Rules
LT14/LT14SE – Total Weight Capacity is 120lbs (54.4kg) • 100lbs (45.5kgs) on the seat. • 5lbs (2.3kgs) on left side wheel. • 5lbs (2.3kgs) on right side wheel. • 10lbs (4.5kgs) on the lower basket. User and Workshop Manual for the Lightning Pushchair Page 3 of 25... -
Page 4: Pushchair Features
Pushchair Features LT11/LT11SE MODEL LT14/LT14SE MODEL User and Workshop Manual for the Lightning Pushchair Page 4 of 25... - Page 5 User and Workshop Manual for the Lightning Pushchair Page 5 of 25...
-
Page 6: Pushchair Accessories
WORK 'N' PLAY TRAY TRANSPORTATION TIE DOWN KIT w/Turn-Up or Down Sides Easy to Remove & Item #: LT-TD Position Item #: LT11-WT (11") Item #: LT14-WT (14") User and Workshop Manual for the Lightning Pushchair Page 6 of 25... -
Page 7: Specifications Chart
NAVY BLUE / RED GLOW NAVY BLUE / RED GLOW COLOR CHOICES UPHOLSTERY FRONT WHEELS 6” / 152.4mm 6” / 152.4mm REAR WHEELS 10” / 254mm 10” / 254mm User and Workshop Manual for the Lightning Pushchair Page 7 of 25... -
Page 8: Introduction
Introduction This Owners Manual will outline the proper method and easy handling of the Lightning Pushchair and gives instructions for the required cleaning and maintenance. To avoid damage caused by improper handling and to allow optimal use of the Lightning Pushchair, please read the following instructions thoroughly. -
Page 9: Setting Up And Adjusting The Pushchair
Velcro strap around the armrest and fastened to the back of the chair. • With care, pick the pushchair up using the plastic handle. Illustration of the pushchair in its correct folding set-up. User and Workshop Manual for the Lightning Pushchair Page 9 of 25... -
Page 10: Seat Back Angle Adjustment
Remove both left and right side backrest tubes. The diagram to the right will show three position adjustments. ⇒ Position 1 = 95° ⇒ Position 2 = 90° ⇒ Position 3 = 85° User and Workshop Manual for the Lightning Pushchair Page 10 of 25... -
Page 11: Seat Depth Adjustment
7.3 Seat Depth Adjustment LT14 Adjustment = 12”-14” (304.8-355.6mm) LT11 Adjustment = 10”-12” (254-304.8mm) • Press release button and move For or Aft for desired depth adjustment. User and Workshop Manual for the Lightning Pushchair Page 11 of 25... -
Page 12: Footrest Height Adjustment
• Swing footplate out • Using a 10mm wrench, loosen the bolts and move to desired location. • Once desired location is achieved, fasten both bolts before use. User and Workshop Manual for the Lightning Pushchair Page 12 of 25... -
Page 13: Adjusting And Using The Safety Harness
Finally, adjust the strap to the desired length and tighten the strap down. Adjusting the height on the Shoulder Strap • Remove both hand nuts from the back of the pushchair User and Workshop Manual for the Lightning Pushchair Page 13 of 25... -
Page 14: Brake System
This will lock both rear wheels To disengage brake • With your foot placed under the brake lever, pull the lever up. This will unlock both rear wheels. User and Workshop Manual for the Lightning Pushchair Page 14 of 25... -
Page 15: Installing Accessories
From the headrest, tie the loose strings onto the headrest extension. • Guide the Velcro strap through the loop and fastened it to other side of the strap. User and Workshop Manual for the Lightning Pushchair Page 15 of 25... -
Page 16: Heel Loop And Ankle Cuffs
On the bottom of the footrest, place the washer and fastened the nut. 8.5 Padded Harness Covers • Wrap cover around the harness straps and fasten one side of the Velcro to the other. User and Workshop Manual for the Lightning Pushchair Page 16 of 25... -
Page 17: Trunk Support
Using the loose strap, guide it through both top support flap rings. • Finally, guide the strap through its own ring and wrap around behind the lower supports flaps. User and Workshop Manual for the Lightning Pushchair Page 17 of 25... -
Page 18: Instructions For Transporting The Lightning Pushchair
INSTRUCTIONS FOR TRANSPORTING THE LIGHTNING PUSHCHAIR The Lightning pushchair can be folded for transport in the luggage area of the vehicle. The Lightning pushchair has been successfully impact tested and meets the requirements specified in ANSI/RESNA WC/Vol.1, Section 19, 5.3., prior to May 2002. It may therefore be used as a vehicle seat. -
Page 19: Attach The Lightning Pushchair To Vehicle
Snap down lever to tension. • To release the Lightning follow the above instructions in reverse order. User and Workshop Manual for the Lightning Pushchair Page 19 of 25... -
Page 20: Instructions For Attaching The Work N Play Tray
10.0 INSTRUCTIONS FOR ATTACHING THE WORK ‘N’ PLAY TRAY The below instructions are for attaching the Work ‘n’ Play tray to the Lightning Pushchair. CAUTION: THE TRAYS HAVE BEEN RATED TO HOLD UP TO 6.8kgs/15lbs OF WEIGHT. DO NOT OVERLOAD. -
Page 21: Maintenance
12.2.6 Examine castor and wheel bearings and suspension for excessive wear. 12.2.7 Check castors and rear wheels for free rotation, security and accumulation of fluff and grit. Remove with a dry lint free cloth. User and Workshop Manual for the Lightning Pushchair Page 21 of 25... -
Page 22: Repair
Through the wheel, and • To the inside wheel cast • Place the washer and nut on the inside of the wheel caster. • Then, tighten with necessary tooli wrenches. User and Workshop Manual for the Lightning Pushchair Page 22 of 25... -
Page 23: Front Wheel Assembly
Then, tighten with necessar y tooling wrenches. • Place the washer and nut on the inside of the wheel mount. • Then, tighten with necessar y tooling wrenches. User and Workshop Manual for the Lightning Pushchair Page 23 of 25... -
Page 24: Replacing/Removing The Back Upholstery
Slide seat tubes out of tube receiver. • Unscrew b oth bolts from the seat tubes. • Slide up holstery from seat tubes. • For reassembly, follow steps in reverse order. User and Workshop Manual for the Lightning Pushchair Page 24 of 25... -
Page 25: Warranty
Equipment for warranty claims should be returned in a strong c arton. There may be 14.3 a charge for collection. User and Workshop Manual for the Lightning Pushchair Page 25 of 25...