Page 1
Upper Extremities USER MANUAL TWB Shoulder Retractors Stealth’s User Manual and Maintenance Guide for The World’s Best Shoulder Retractors...
Page 2
Customer Satisfaction Stealth Products strives for 100% customer satisfaction. Your complete satisfaction is important. Please contact us with feedback or suggested changes that will help improve the quality and usability of our products. You may reach us at: Stealth Products, LLC...
Page 3
Important Information Important Information! All persons responsible for fitting, adjustment, and daily use of the devices discussed in these instructions must be familiar with and understand all safety aspects of the devices mentioned. In order for our products to be used successfully, you must: ...
They also contain important safety and maintenance information. For further assistance, or more advanced applications, please contact your supplier or Stealth Products at (512) 715-9995 or toll free at 1-800-965-9229. Always keep the operating instructions in a safe place so they may be referenced as necessary.
Stealth Products, LLC is liable for replacement parts only. Stealth Products, LLC is not liable for any incurred labor costs. No person is authorized to alter, extend, or waive the warranties of Stealth Products, LLC. Stealth Products warrants against failure due to defective materials...
Limited Liability Stealth Products, LLC accepts no liability for personal injury or damage to property that may arise from the failure of the user or other persons to follow the recommendations, warnings, and instructions in this manual.
Installation Instructions Parts and Accessories 1/4-20 Button Head Screws for Links 1/4-20 Socket Head Screws for Mounting Hardware Mounting to the Chair In order to mount the shoulder retractors to the chair: Locate the T-Nuts or designated holes on the seat back. Line up the holes on the tracks to the designated holes on the seat back.
Installation Instructions Adjusting the Hardware Angle Adjustment For angle adjustment of the shoulder retractors: Lightly loosen the Flat Head Screws (A). Set the desired angle. Retighten the screws using a 5/32 hex key. Height Adjustment To adjust the height of the shoulder retractors: Loosen the Button Head Screws (B).
First Time Use Dealer Assistance During first time use by the client, it is advised that the dealer or service technician assists and explains the configurations to the customer (the user and/or the attendant). If needed, the dealer can make final adjustments. User Testing It is important that the customer is fully aware of the installation, how to use it, and what can be adjusted in order to gain as much mobility as possible.
Maintenance Cleaning Positioning accessories can be wiped clean with a damp cloth and mild, nonabrasive cleaner. To wash cover, remove the cover from the support pad, machine wash in cold water on a delicate cycle and let drip dry. Do not immerse in water or rinse with a water hose.
Page 12
Stealth Products, LLC. • info@stealthproducts.com • www.stealthproducts.com +1(800) 965-9229 | +1(512) 715-9995 | 104 John Kelly Drive, Burnet TX 78611 P91D279 Revision Date 2019-12-17...