Table of Contents
Advertisement
•
When saying a number, speak at a normal speed and say each
digit clearly. There is no need to pause between digits.
•
The phone recognizes the digits one, two, three, four, five, six,
seven, eight, nine, zero, and oh. The phone does not
recognize numbers such as "one eight hundred" for "1-800".
Instead, say "one-eight-zero-zero".
•
The phone recognizes only valid 7, 10 or 11 digit North
American phone numbers.
•
If your phone does not usually recognize you correctly when
you are using voice Call, try adapting Call to your voice, which
can significantly improve accuracy for some speakers. (See
"Changing Voice Dial Sensitivity" on page 115 for details.)
To place a call using voice Call:
1.
Activate voice recognition by pressing and holding. (The phone
prompts you for a command.)
2.
Say Call. (The phone prompts you to say the number.)
3.
Say either a name stored in your Contacts or a valid 7, 10 or 11
digit North American phone number naturally and clearly.
•
If the phone asks you, "Did You Say," followed by the correct
number, say Yes. (You can also select the correct number
from those displayed on the screen by pressing
correct number. The phone will then dial the number.)
•
If the phone asks you, "Did You Say," followed by an
incorrect number, say No. (If there are other alternatives, the
phone will prompt you with the next one. You can also press
the navigation key up or down to select the correct number
from the Choice List, and then press
on the
to dial.)
Tools & Apps 112
Advertisement
Table of Contents
