Installing The Camera Module Assembly; Installing The Flash Module - Motorola Motozine ZN5 Service Manual
Hide thumbs
Also See for Motozine ZN5:
- Getting started manual (60 pages) ,
- Getting started manual (16 pages)
Table of Contents
Advertisement
Level 1 and 2 Service Manual
Installing the Camera Module Assembly
Installing the Flash Module
68000222001-B
1.
Place the camera module into the opening on the main PCB. The camera must
be angled under the daughter board.
2.
Connect the camera module flex connector BTB to the daughter board.
Figure 36. Installing the Camera Module to Main PCB
1.
Place the flash module into the opening on the main PCB, sliding it from the
south direction.
2.
Connect the flash module flex connector to the daughter board.
November 10, 2008
Assembly
v541664
43
Advertisement
Table of Contents
