InStep Single Seat Swivel Wheel Jogging Stroller User Manual page 15

3. Fold the car seat handle down (if applicable).
4. Raise the jogger seat by unfastening the
buckle on the back of the seat. Pull the
strap until it is flush against the car seat.
5. Remove the safety straps from the side
pockets located below the stroller handles.
6.
Wrap the end of the safety strap
with the slotted ring around the
lower frame support with the
ring on the inside. Place the
strap through the slot in the ring
anchoring the strap to the
frame. Repeat for other strap.
7. Thread the straps under the front frame
support, then between the frame and child tray
as shown. Pull the straps over the top of the
car seat. Each car seat is different; refer to
your car seat's instruction manual for additional
instructions or guidelines.
8.
Fasten the straps in the center of the car
seat, and tighten as needed.
-
13