Adjusting The Shoulder Strap Height; Using The Safety Wrist Strap - InStep Single Seat Swivel Wheel Jogging Stroller User Manual

Adjusting the Shoulder
Strap Height
There are three slots on the back of the seat.
These slots are used to adjust the proper height of
the shoulder straps to your child's height. To adjust
the shoulder strap height:
1. Starting from the back
of the seat, pull the
shoulder strap anchor
away form the seat.
2. Insert the anchor
through the slit in the
seat, pushing it towards
the front.
3. Re-insert the anchor
through the slit in the
front of the seat at the
desired height.
4. Pull the strap and
anchor all the way
through to the back.
Make sure the strap is
properly anchored on
the seat back. Repeat
these steps for the
opposite strap.
10

Using the Safety Wrist Strap

WARNING!
Using the Jogging Stroller without the safety wrist
strap may result in the user becoming separated
from the stroller and serious injury or death to the
passenger. Always use the safety wrist strap when
using the Jogging Stroller. Always engage the rear
parking brakes before removing the strap.
1. Position the strap on the inside of the
rear axle.
Bring the two ends forward and slide the end
2.
with the large loop through the small loop.
Hold the large loop and pull the strap tight to
3.
the rear axle.
Place your hand through the large loop so the
4.
strap is comfortable and secure.