Table of Contents
Advertisement
8.11.1 DDNS
The DDNS sub-menu allows you to configure DDNS settings. Before
configuring DDNS settings, you must register the camera for a free
Digimerge DDNS account (see "7. Configuring Remote Connection" on
page 18).
To configure DDNS settings:
1. Click Network Service>DDNS.
2. Check Enable DDNS.
3. Configure the following:
• Provider: Select digimerge_ddns.
• Domain Name: Enter the Domain Name you received from the
confirmation email you received after you created your DDNS account.
NOTE: Connect to your camera using a web browser by entering http://,
the Domain Name, colon, and then the HTTP port. For example, if the
Domain Name is
http://tomsmith.digimerge.net:80
• User Name: Enter the User Name you received in the confirmation email.
• Password: Enter the Password you received in the confirmation email.
4. Click OK to save settings.
8.12 Service Center
Service Center contains the following sub-menus:
• SMTP
• Alarm Center (not supported)
tomsmith.digimerge.net
.
Web Configuration
, use the address
51
Advertisement
Table of Contents
