Table of Contents
Advertisement
Web Configuration
8.10 Privacy Masking
The Privacy Masking menu allows you to create up to 5 privacy areas that will
not appear in recordings. You can cover up to 8% of the total image area.
To configure privacy areas:
1. Click Privacy Masking.
2. Check Enable Privacy Masking.
3. Click and drag inside the video area to configure privacy areas. Privacy
areas will be shown as green rectangles. Right-click to delete the last
created area.
4. Click OK. An error message appears if the masks configured exceed 8%
of the total image area.
8.11 Network Service
Network Service contains the following sub-menus:
• DDNS
• PPPoE (Not supported)
50
Privacy area
Advertisement
Table of Contents
