Advertisement
For example to change the Rx Switch Tick setting:
Button pressed for > 5 seconds
Dash Dot Dot Dot
Dot Dot
Dot
At this point the Rx Switch Tick setting has been changed to 'Tick Off'. The module will now continue
with the next item in the menu, and continue to the end of the list. Once the end of the list is reached,
the receiver will automatically exit the programming mode signaled by two short beeps.
Beep Codes
Beep Code
- .
- . .
- . . .
Note that * indicates the default value .
www.immersionrc.com
- third menu item –
-
- first available option -
Menu
Menu Choices
1 – Auto (for 2S or 3S LiPo)*
Low Batt Volts
2 – 6v
3 – 7v
4 – 8v
5 – 9v
6 –10v
7 – 11v
8 – 12v
Default: 6V for 2S, 9V for 3S
Low Batt 100mV
1 – 0.0v .... 10 – 0.9v
Default: 0.5v (for threshold of 9.5v)
(Ignored in Auto mode)
Rx Switch Tick
1 – Tick Off
2 – Tick On *
press button briefly to enter setting
current setting
Tick Off press button briefly
info@immersionrc.com
Advertisement
