ImmersionRC Duo 5800 Instruction Manual


Twin receivers for best reception.

Standard 5.8GHz band
frequencies: 5740MHz, 5760MHz,
5780MHz, 5800MHz, 5820MHz,
5840MHz, 5860MHz

Automatic antenna switching.

Calibrated receivers for seamless
switching between antennas

Dual, buffered AV outputs

Automatic of user configurable
low battery alarm

Can be powered from 6-13V (< 9v,
or 2s recommended)

High bandwidth stereo-audio.

Single button operation for
channel selection

Visual indication of selected
antenna

Twin female SMA antenna
connectors

FM Audio/Video Modulation

-85dB typical sensitivity

50 ohm antenna impedance

1Vpp Video output level

3V pp Audio output Level

Small, light weight, durable,
anodized aluminum casing

Weight: 169-grams

Size : 103 x 90 x 23mm
www.immersionrc.com
Duo 5800 Diversity Receiver
Twin receivers for best reception
Conventional receivers have one big drawback, they only allow for a single
antenna to be connected. If for some reason the reception fails there's no
backup and you lose the signal. Not so with the Duo 5800 diversity
receiver. With its twin receivers it allows you to hook up two antennas
and the microcontroller inside will automatically switch to the receiver
with the strongest signal, without any switching noise or a change in the
image received.
With -85dB sensitivity per receiver the Duo 5800 is sensitive, very
sensitive. Paired with two flat patch antennas it will give you many
miles/kilometers of range. It is engineered from an FPV-er's perspective
and hence has features to match. It'll warn you when the receiver battery
runs low, or when switching antennas. The diversity receiver works best
with either a 2S or 3S LiPo battery and the low voltage warning can be set
accordingly, either automatically, or user configurable.
Equipped with two buffered AV outputs it allows you to connect your
goggles, as well as your recording device, without the need for Y-cables or
a signal splitter. Operating the Duo 5800 Diversity Receiver couldn't be
simpler. After applying power it'll beep the number of LiPo cells it has
detected and sets the low voltage warning to match. Selecting channels is
a breeze; four channels according to the frequencies used by Airwave and
another six as used by Lawmate are available with the press of a button.
ImmersionRC – Real Virtuality
.
info@immersionrc.com