Programming; Basic Instructions; Programming Screen - Sharp XE-A207W Full Detailed Instruction Manual

a

Programming

This chapter explains how to program various items.
Before you start programming, select the PRICE, PGM, AUTO KEY or SD CARD mode from the mode
selection screen depending on the item you are going to program.
Basic Instructions
This section illustrates the basic programming by using an example of programming for departments.
■ Programming screen
Opening screen: When you turn the mode key to PGM, your display will show a programming opening
screen corresponding to the mode you selected.
Code selecting screen (Dept. PLU):

Programming screen:

Mode you are in
Programming menu: Use the cursor keys or numeric key to select
Numeric entry and status information area
Code title
Code number and its description
(In case of PLU, two lines are used for one code, upper line -
code, lower line - description.)
Use the cursor keys or numeric keys to select an option, and
press the A key. (When you select the last item, the screen goes
to the selected option screen without pressing the
Numeric entry and status information area
Selected menu message
Setting items:
Use the cursor keys to select an item.
To select an option, follow the instruction shown below.
Numeric entry: Use numeric keys
Character entry: Use character keys
Selective entry: Press
key to select it, or press the
the option list. Use the cursor keys to move the
cursor and press the
65
an option, and press the
. key to toggle options and press the
A
A key.
A key.)
A
z key to show
key to select it.