Measuring Using Auto Recognition Feature - Bowflex 7224FBOW Instruction Manual

Smart scale with bluetooth 4.0 technology

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

MEASUREMENT PROCEDURES WITHOUT BLUETOOTH®

Use these tips to get the most accurate and consistent readings from

your scale:

• Place the scale on a flat, hard floor surface. Carpeted or uneven

floors may affect accuracy. If you experience any difficulty, move

the scale to a different, hard flat surface and try again.

• You must have bare feet for estimation results. Remove your shoes

and socks before proceeding. Clean, slightly moist feet will provide

the best results. Position your feet for maximum contact with the

metal electrodes on the platform.

• Balance your weight evenly between both feet and stand still while

on the scale.

• Weigh yourself at the same time each day to see consistent trends.

Your weight and other measures will naturally vary during the

course of the day.

• IMPORTANT: The scale needs to be initialized after battery installation

or if it is moved or bumped. At all other times, you may step directly

on the scale for a reading. To initialize the scale, simply press firmly

on the scale platform. The display will turn on and automatically

turn off. Your scale is now ready for use.

Measuring by Selecting a User Number Manually

1. Press "SET" to turn the scale on.

2. Press "▲" or "▼" to move to your memory number (P1-P8).

3. The memory number will blink 3 times then remain steady. The display will show

your data and then zero.

(Note: if you press "SET" while the memory number is blinking, the scale will enter

Setting Mode instead of Measurement Mode. If this occurs, press "SET" to re-confirm

all the data. The scale will show the data again and then zero. When the (

appears on the LCD the data is not sent to a mobile device.

4. When the scale shows zero, step on the

scale with bare feet, positioning your feet

evenly on the scale platform with maximum

contact with the metal electrodes.

5. Stand still while the scale measures your weight. Your weight will appear on the

screen. Continue to stand still on the scale. A moving zeros pattern shows while

the scale estimates your body composition.

6. Your body fat % (FAT), total body water % (TBW), muscle mass (MUS), calorie

estimate (CAL), and the difference between your current and goal weights are

displayed sequentially 3 times.

PRECAUTION !

(A "

To avoid injury, do not

step with wet feet or on

the edge of the platform.

Do Not step on scale

unevenly (X)

PRECAUTION !

The scale must

be started up

after each

7. The scale will turn off automatically.

battery insertion/

replacement of

Notes:

battery or each

A) If the scale is paired with your mobile device and the Bluetooth® is ON, the scale

time it is moved or

bumped.

B) If the scale cannot identify the user's memory number, it will only display the

After you have saved your personal profile data into a memory number and

weighed yourself once, the scale will automatically recognize you for future weigh-

ins. It does this based upon the weight of the user (it will detect all profiles within +/-

4.4 lbs / 2 kgs).

1. When you step the platform, if there is only one user whose last weight data is

) icon

2. If two or more users are in a similar weight range (within +/- 4.4 lbs

Note: You need to save your personal data in a user number before using the

automatic user identification measuring method, or the function will not work.

" arrow by the goal weight number indicates you are over your goal

weight. A "

" arrow indicates you are under your goal weight.)

BODY FAT

MUSCLE MASS

CALORIE ESTIMATE

will send the measurement results to the mobile device instead of the scale, and

the scale display will be blank.

weight. See "Problem Solving" section.