Advertisement
STEP 1
Turn it On
STEP 2
Load Your Music
CONNECT THE USB CABLE
With the GO-DJ™ powered on, connect it to a USB
port on your computer using the supplied cable.
(The cable is mini USB to standard USB) While
plugged in the GO-DJ battery is charging.
ENTER USB STORAGE MODE
Swipe all the way to the Options screen, which is
the farthest screen to the right, four screens away
from the Digital Turntables. You should see a screen
with five tabs at the top of it. Click on the SYSTEM
tab on the right. One of the controls on the screen
will be labeled "USB Storage Mode". Slide that to
the right and a dialog box will appear. Click "OK".
You will see a message saying "Connected" on
the GO-DJ™. Meanwhile, on your computer, three
removable drives will have appeared along with
your other drives.
STEP 3
Hook It Up
SPEAKERS
Connect your speakers to the mini stereo 1/8"
(3.5mm) LINE OUT jack on the back of the GO-DJ.
HEADPHONES
Connect your headphones to the mini stereo 1/8"
PHONES jack on the front.
Hold down the power button (on the right side of
the unit) for about one second. Unit will power on.
COPY YOUR MUSIC TO THE GO-DJ
Copy your music into the drive named GO-DJ™
DRIVE. You can create a folder structure within the
drive that helps you organize your music. Ignore the
other drives for now.
One of the other drives that appears is used to store recordings
of your mixes. Another contains a copy of the owner's manual in
PDF form.
DISCONNECT THE GO-DJ™
Safely eject the GO_DJ™ drives from your computer.
Please eject all visible GO-DJ™ drives and when
finished press the "Cancel" button on either screen
of the GO-DJ™ A dialog box will appear. Press "OK"
in the dialog box. The GO-DJ™ will reboot.
If you don't have speakers, you can also connect
your headphones to the LINE OUT jack on the back,
but you'll be missing out.
™
3
Advertisement
