Sony Cyber-Shot DSC-P5 Operating Instructions Manual page 37

0 Prepare your camera.
utlet
ket)
@ Insert a "Memory Stick" into your camera.
@ Connect the AC power adaptor to your camera.
@ Turn on your camera.
"USB MODE" appears on the LCD screen of your camera.
When you first connect the camera, the Device Manager automatically
starts twice in succession to allow your computer to recognize the camera.
There is no need to operate either your computer or the camera during this
period. Be sure to wait until the Device Manager has started twice.
q Note
If "USB MODE" does not appear after finishing step 0, check [USB CONNECT] in the
SET UP settings, and change the setting to
[NORMAL] if it is different.
q Notes
l
Do not connect the USB cable before the USB driver installation is completed in step 0.
l
In step 0, make sure that a "Memory Stick" is inserted into your camera before taming on
the camera. Otherwise, you will be unable to recognize the camera.
37