Box Contents; Product Overview; Unit Information; Necessary Equipment For Installation - Maxtor NAS 3000 Installation Manual
Hide thumbs
Also See for NAS 3000:
- Quick start manual (2 pages) ,
- Specifications (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
MaxAttach NAS 3000 Installation Guide
1
Box Contents
The MaxAttach
NAS 3000 box contains:
™
MaxAttach NAS 3000 Network Storage Appliance
Quick Start Guide
Installation Guide
Power Adapter and Power Cord
Six Foot Category 5 10/100 Mbps Ethernet LAN Cable
CD-ROM Containing MaxNeighborhood
CD-ROM Containing Reflect-It
Warranty Registration Card
2
Product Overview
Your MaxAttach unit comes ready to install with all the required software. It works in
a 10/100 Mbps Ethernet network, and is administered using a web browser. It includes
MaxNeighborhood, a software utility that helps you locate the unit on your network and
launch the browser-based graphical user interface.
Unit Information
Please record the following information found on the bottom of the MaxAttach unit. This
information will be needed to identify your unit for configuration or Maxtor Support.
Model Number:
Serial Number/Device ID:
Necessary Equipment for Installation
To connect, install and administer your MaxAttach NAS 3000, you will need a network
hub or switch. You will also need the following capabilities on your workstation:
Windows 95/98/NT (SP5) /2000 with network access
Internet Explorer v4.01 or later, or Netscape v4.08 or later
TCP/IP Enabled. If you do not have TCP/IP enabled, please see
Troubleshooting Section 10.1
10/100 Mbps Ethernet Network Interface Card, (NIC)
Software drivers for the NIC
CD-ROM drive
™
Client Software
™
Back-up Software
1
Advertisement
Table of Contents
