Connecting A Pc Or Laptop To Maxattach; Restarting The System; Logging Off - Maxtor NAS 3000 Installation Manual

Hide thumbs Also See for NAS 3000:

Table of Contents

Connecting a PC or Laptop to MaxAttach

Go to Network Neighborhood. The name of your workgroup should be displayed

here. If not, click on Entire Network. Double click on your workgroup name and your

server name. Your unit should appear. Double-click on your unit. All available shares

should be displayed. If not, see Troubleshooting Section 10.5. Click on share, its

folders will appear.

Now, choose the share for your PC or laptop. Right click on share, and a drop down

menu will appear. Select Map Network Drive. Another window will appear, select

an available drive letter, not the one used for your CD-ROM. Try to choose one that

is higher than letter F. Make sure that the Reconnect at Logon box is checked. Press

the Enter key or click OK. You are done.

To verify that your drive now exists, click on My Computer. The new drive should now

appear.

Ask users to save their data and log out. Then go to the Tools option in the left

navigation bar. Click on the shutdown tab. Make sure all users are logged out.

Your setting and configuration information will be saved.

If you want Restart to occur immediately, change the How Long to Execute to

0 minutes. Click on the Restart button.

When the restart is done, you will be asked to enter your password. Enter it, then

press the Enter key or click OK.

Logging off for the administrator is only necessary for security reasons. Also, after

two minutes, your system automatically logs you off. You will get a logon prompt

when you try to reenter.

To log off, select the Log Off option in the left navigation bar. Follow the prompts.

Table of Contents