Preparing For Installation; Equipment; Documentation And Software; Safety Considerations - Motorola MC3000 Operating And Installation Manual

Installation

Preparing for Installation

Preparing for Installation

Equipment

• High impedance audio multi-meter with a range of 80mV
measuring 1000 Hz
• #1 Phillips screwdriver
• 1/8-inch flat-blade screwdriver
• Optionally, an RF service monitor or tone generator

Documentation and Software

• MC3000 deskset schematics—in Chapter 4
• MC3000 deskset digital radio function buttons cross-referenced to the four radio
types—in Chapter 3
• Deskset/s installation plan—specific to the location
• Labeling software

Safety Considerations

Cable Installation
• Wiring should conform to Article 800 of the National Electrical Code. Ensure you use
listed communication wiring and cabling suitable and specific to the interconnection of
other equipment.
Electrostatic Discharge (ESD) Protection
• The deskset has ESD protection circuitry to provide protection from ESD, power and
telephone line surges. The circuitry shunts the transient currents to earth ground.
2-2
RMS
MC3000 Digital Deskset Operator and Installation Manual
to 4 V , capable of
RMS
(6880309L15-A)