Security Settings; Encrypt & Decrypt Data - Kyocera Hydro Life User Manual

Mobile phone
Hide thumbs Also See for Hydro Life:
Table of Contents

Advertisement

3.
Touch the widget you want to add. You can add one widget to each page.
Tip:
You can add up to five widgets to your lock screen. To reorder locations, drag the
widgets panel down to expand it, touch and hold a widget, and then drag it to a
new location you want.
Remove a Lock Screen Widget
1.
On the lock screen, drag the widgets panel down to expand it.
2.
Slide to left to select the widget you want to remove, and touch and hold it, then
drag it to "
3.
Release your finger when it turns red.

Security Settings

The Security settings menus let you set encryption options, password visibility,
administrator settings, and credential storage option.
Encrypt & Decrypt Data
You can encrypt your phone and the SD card installed in your phone. For both
encryption and decryption, you need to enter a PIN or password for the screen lock. To
set up a PIN or password, see
Warning:
Refrain from using the phone, including removing the battery and the SD
card, during the encryption process as some or all of your data will be lost
if the encryption process is interrupted.
1. Charge the battery first.
2. With your phone connected to the power source, touch Home
Settings > Security > Encrypt & Decrypt data.
3. Select an option:
 Phone & SD card to encrypt your phone as well as the inserted SD card.
 Phone to encrypt your phone only.
 SD card to encrypt the inserted SD card only.
4. Read the message displayed and touch Next.
5. Enter the PIN or password for the screen lock and touch Next.
6. Read the message displayed and touch Encrypt.
Make Passwords Visible
You can hide your password or PIN number as you type it.
Settings
Remove"at the top of the screen.
Screen
Lock.
145
>
>

Advertisement

Table of Contents
loading

Table of Contents