Standby) Switch / Indicator Section; Control Button Section (Top) - Sony PFM-42V1A Operation Instructions Manual

Location and Function of Parts and Controls
1 (standby) Switch / Indicator
Section
1 1 (standby) switch
Press to power on the display unit. Press again to
return to the standby mode.
Note
To protect the panel, a certain amount of time is
required to turn the unit ON/STANDBY. Wait about 8
seconds after one of these operations before pressing
this switch again.
2 STANDBY indicator
Lights up in red in the standby mode.
When the STANDBY indicator flashes, see "Self-diagnosis
Function" on page 48 (GB).
3 ON indicator
Lights up in green when the display unit is powered
on.
4 Remote control detector
Receives the signals from the Remote Commander.
8
(GB)

Control Button Section (Top)

4
3
2
1
1 MENU button
Press to show menus. Press again to hide them.
To use the MENU button to return to the previous menu
level, see "Initial Setup menu" on page 23 (GB).
2 m/M buttons
Press to move the cursor (yellow) to an item you want
to select or to adjust a value in a menu.
3 ENTER button
Press to set your choice.
4 VOLUME +/– button
Press to adjust the speaker volume.
1 2 3 4
MENU ENTER VOLUME