Table of Contents
Advertisement
Pull out the mains connection
cable a
^ Pull out the connection cable to the
required length (max. cable length
approx. 5.5 m).
,
If vacuuming for longer than
30 minutes, the connection cable
must be pulled out to its fullest
extent. Otherwise there is a danger
of overheating.
Rewinding the cable b
^ Switch off at the wall socket and
remove the plug.
^ Press the rewind foot switch. The
cable will rewind automatically.
Switching on and off
^ Step on the On/Off foot control s.
,
When vacuuming especially fine
dust, e.g. sawdust, sand, flour,
talcum powder etc., electrostatic
charges build up naturally. Under
certain conditions these charges will
be released. To avoid the
unpleasant effects of these
discharges, a metal inlay has been
incorporated into the underside of
the handle. Please make sure that
you keep your hand in constant
contact with this metal strip during
vacuuming.
Use
13
Hide quick links:
Advertisement
Table of Contents
