Guiding By Using Qhy5 In Phd - QHYCCD QHY5 User Manual

Guiding by using QHY5 in PHD

1. Connect the QHY5
mount's guide spot.
2. Run PHD, choose Connect to Camera (
ASCOM v5 camera-CMOS
Properties, set Gain, click OK to return.
3. Choose Mount-On-camera, and then click
Connect to telescope (
4. Click to expose. You can change the
expose time at the pull-down menu, and
change the screen
changing the slider's position.
5. Find a star in the realtime image, click
it, the star will be marked by a green
box.
6. Click to start guiding.
7. Choose Tools-Enable Graph to show the
guiding graph.
15
and the equatorial
)-
QHY5 Camera-
).
luminance with
QHY5 Guiding Port Definition
QHY5 uses the ST-4 guiding port, you can
watch the under picture to know detail.
16