Connect Input Source - Composite AV IN
(PLED-W800 only)
*AV cable is an
optional accessory
Connect to DVD player
1. Connect the AV input source.
2. After powering on the projector, press the SOURCE button on the control panel
to select the appropriate input source.
Audio/Video Cable Specifications
All other brand and product names are trademarks or registered trademarks of their respective
companies.
The cables connecting the video output devices are not supplied, please contact the device vendor.
iPod nano/iPod touch/iPhone/iPod classic (version 5 and above).
Designed for iPod/iPhone/Smart Phone/PMP with TV out functions. Using with devices with audio signal
voltage > 0.3Vrms is not recommended.
Composite mode only supports video input source.
Insert SD Card (PLED-W800 only)
Insert an SD card into the slot with the gold contacts facing down.
To remove the SD card, simply pull out the memory card from the slot.
Do not remove the SD card while the projector is projecting images from the card. This can cause data
loss or damage the card.
Supports SD card size up to 32GB.
The SD card is not included in the package.
TM
PIN
1 2 3 4
1
2
CVBS
GND
3
Audio (Right)
Audio (Left)
4
13
For video and
audio input
Connect to iPod Touch 5
Signal
CVBS
GND
Audio (Right)
Audio (Left)