Initializing A Memory Card - JVC GR-D770U Instructions Manual

28 ADDITIONAL FEATURES FOR D.S.C.
EN
To Print By Selecting Still Images And
Number Of Prints
1
Perform steps 1 – 3 in "To Print All Still
Images (One Print For Each)" (
2
Select "CURRENT",
press SET or . The
2
DPOF screen appears.
3
Press or to select
1 2
the desired file.
Select
4
Press or to select the number
4 3
indication (00), and press SET.
5
Select the number of prints
by pressing to increase the
3
number, or to decrease the
4
number, and press SET.
3
Repeat steps through
5
for the desired number
of prints.
The number of prints
can be set up to 15.
To correct the number of
prints, select the image
again and change the number.
6
Select "RETURN",
press SET. The "SAVE?"
appears.
If you did not change any
3
settings in step
5
through , the DPOF
Menu reappears.
7
Select "EXECUTE", press SET.
To cancel selection, select "CANCEL".
pg. 27).
DPOF
SHEETS
02
RETURN
1
Select
2
SET
DPOF
SHEETS
02
DPOF
SAVE?
EXECUTE
CANCEL
To Reset The Number Of Prints
1
Perform steps 1 – 3 in "To Print All Still
Images (One Print For Each)" (
2
Select "RESET", press SET or
DPOF screen appears.
3
Select "EXECUTE", press SET.
To cancel selection, select "RETURN".
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
NOTE:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with "DIS"
de-activated ( pg. 30) this can be avoided.

Initializing A Memory Card

You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have
been protected, are cleared.
1
Perform steps 1 – 3 in "Normal Playback
Of Images" ( pg. 25).
2
Press MENU.
3
Select "FORMAT", press SET
or . The FORMAT screen
2
appears.
Press 1 whenever you want to
return to the previous menu
screen.
4
Select "EXECUTE",
press SET. The memory
card is initialized.
When initialization is
finished, "NO IMAGES
STORED" appears.
To cancel initialization, select "CANCEL".
pg. 27).
. The
2
1
Select
2
SET
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
CANCEL