The Display - Inforad smart User Manual

Danger zone and speed camera warning system
Table of Contents

Advertisement

If the smart does not detect a key within 15 seconds, a
message asking you to check the remote control is displayed
for 5 seconds, after which the main screen appears.
If the « check remote control » message is displayed even
though you pressed one of the keys during the allotted time,
the remote control may be defective. Check the batteries
and restart your Smart to try again.
To optimize the GPS reception, install the smart on its cradle and make sure that the GPs
antenna
(9)
located on the rear side of the right upper corner is visible to the sky.
Once your smart is operational, satellite data acquisition starts and the GPS icon
remains disabled (crossed out in red) throughout the process. This may last from several
minutes depending on your location (acquisition is faster in open areas than in the city or
under tree cover). Once acquisition is complete, the GPS icon
disappears), indicating that your smart is fully functional.
5.3 - turning the device off
To stop the device, press the «on/off» button (7).

6 - the DIsPlaY

Your smart's graphical interface has been carefully designed for maximum clarity:
A. GPS acquisition status,
B. GSM/GPRS signal level,
C. Remote control status,
D. Message notification,
E. Speed limiter notification,
F. Selected protection mode,
G. Volume level,
H. Selected speed units,
• GPs (a): disabled until satellite data acquisition is complete, or when GPS connection
is temporarily lost. When this icon is enabled, the number of tracked satellites is
displayed. Without a GPS signal, your Smart cannot locate your position.
• GsM/GPRs (b): displays the GSM/GPRS signal level. Disabled until GSM/GPRS data
acquisition is complete, or when the connection is temporarily lost.
www.inforad.eu
8
A B C D E F G H I
J
K
- Standard screen -
(h)
(a)
L
M
N
I. Battery charge level,
J. Speed limit,
K. Road name,
L. Current speed,
M. Number of Smart users heading in the
same direction as you,
N. Time to reach the first Smart user
heading you
(a)
is enabled (the cross

Advertisement

Table of Contents
loading

Table of Contents