When Using The Mx-200 Connected To An Mr-200 - Rodgers MX-200 Owner's Manual

■ When Using the MX-200 Connected to an MR-200

fig.Connect2.e
Rodgers organ
MR-200
AC Adaptor
(ACI series
or
PSB-1U)
When Powering the MX-200 from an
MR-200
The MR-200 is equipped with a DC OUT jack for use with
external devices. You can use this to supply power to the
MX-200. This feature allows you to turn on the power to the
MX-200 and the MR-200 simultaneously.
Leave the MX-200's POWER switch on at all times.
When connecting to an organ that is not
equipped with a Sequencer connector,
connect to the MIDI OUT connector.
MIDI OUT A MIDI IN
MIDI OUT B
←
You can use the DC cable included
with the MR-200 to supply power
from the MR-200 to the MX-200.
MX-200
This headphone jack only allows you to
listen to the tones from the MIDI couplers.
To enjoy the sounds from the entire organ,
use the organ's headphone jack.
MIDI IN
When connecting the devices in this manner, use the 9V/2A
adapter included with the MR-200.
A Rodgers organ is capable of powering only one external
device. It cannot be used to supply power to both the MR-200
and the MX-200. When powering the MR-200 from a Rodgers
organ, do not use the MR-200's DC OUT jack.
Setting up your MX-200
AC Adaptor
(included with the MR-200)
Headphones
19