CipherLab 8300 Reference Manual page 86

8300 Series Mobile Computer
Baud Rate
115200 (bps)
76800 (bps)
57600 (bps)
38400 (bps)
19200 (bps)
9600 (bps)
4800 (bps)
2400 (bps)
Note: If you select to use Serial IR of the Modem Cradle, any value other than 57600
bps (default) must be configured through the DIP switch on the IR control board.
LOAD PROGRAM VIA BLUETOOTH
1) Go to System Menu > Bluetooth Menu > 3. Security, and configure the following
Bluetooth settings first.
Authentication
PIN code
2) Go to System Menu > 6. Load Program and select Bluetooth.
3) Start the pairing procedure from your computer, for example, click [Pair Device]
and/or [Connect Bluetooth Serial Port].
4) Run any of the download utilities: ProgLoad.exe or Download.exe
- Select interface RS-232/IrDA for using Bluetooth SPP.
- Select COM port properties that match with the serial port settings used on your
computer.
Note: The interface option "Bluetooth" is only available on 8330 or 8360.
76
Reference Manual
Supported on CipherLab software, including download utilities.
N/A
Supported on CipherLab software, including download utilities.
Supported on CipherLab software, including download utilities.
Supported on CipherLab software, including download utilities.
Supported on CipherLab software, including download utilities.
N/A
N/A