Panasonic CS-KC9NKH-3 Operating Instructions Manual page 5

TO MONITOR HUMAN
PRESENCE & ACTIVITY
6 7
FOR ENERGY SAVING &
COMFORT
To optimize energy saving
ECONAVI
AUTO
To maximize comfort
COMFORT
Heat Source & Movement
Low
COOL/DRY Mode
Set Temperature
+1 tap*
Set Fan Speed
* For first 15 minutes or until set temperature is reached.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is infl uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
Press and hold for 5 seconds to dim or restore the
8
unit's indicator brightness.
Press and hold for approximately 10 seconds to
9
show temperature setting in °C or °F
Press to restore the remote control's default setting.
10
Not used in normal operations.
11
ECONAVI/
AUTO COMFORT
High Normal None
+1°C
-1°C
≤ Medium
Fan
+1 tap
TO SET THE TIMER TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
1
OFF
Select ON or
+2°C
OFF timer
• To cancel ON or OFF timer, press
press .
CANCEL
• When ON Timer is set, the unit may start earlier (up
to 15 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation
on the back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
AUTO
ECONAVI
COMFORT
,
• Can be activated in all modes and can be cancelled
by pressing the respective button again.
• Cannot be selected at the same time.
2
SET
Set the time Confi rm
ON
or
OFF
SET
.
NOTES NOTES
then
5