Disposal - Electrolux EOK76030 User Manual

Connection via
Cooker Control
Circuit
It is necessary that you install a double
pole switch between the oven and the
electricity supply (mains), with a mini-
mum gap of 3 mm between the switch
contacts and of a type suitable for the
required load in compliance with the cur-
rent regulations.
The switch must not break the yellow
and green earth cable at any point.
After installation and connecting,
the cable must be placed so that it

Disposal

The symbol on the product or on its
packaging indicates that this product
may not be treated as household waste.
Instead it should be taken to the
appropriate collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling
of this product. For more detailed
information about recycling of this
product, please contact your local
Min. size Cable/
flex
2,5 mm²
disposal electrolux 55
Cable/flex type
PVC/PVC twin and
earth
cannot at any point reach a temper-
ature of more than 50°C above the
ambient temperature.
Before the oven is connected, check
that the main fuse and the domestic
installation can support the load;
and that the power supply is prop-
erly earthed.
The manufacturer declines any re-
sponsibility should these safety
measures not be carried out.
council, your household waste disposal
service or the shop where you
purchased the product.
Packaging material
The packaging material is environ-
mentally-friendly and recyclable.
Plastic parts are marked with inter-
national abbreviations such as PE,
PS, etc. Dispose of the packaging
material in the containers provided
for this purpose at your local waste
management facility.
Fuse
min: 15 A
max: 20 A