Table of Contents
Advertisement
Names of parts and their functions (continued)
Output level control section
OUTPUT LEVEL
1
ADJUST
2
1
GAIN switch
[AUTO]
Adjusts gain automatically.
In this mode, the [GAIN UP]/[GAIN DOWN] button
[SHUTTER UP]/[SHUTTER DOWN] button
disabled.
[MANUAL]
Set to this position when adjust the [GAIN] and [SHUTTER]
manually.
2
ADJUST volume
Set the brightness during auto sensitivity adjustment.
Enabled only when [GAIN] switch
3
GAIN UP/GAIN DOWN button
[GAIN UP]
Each time this button is pressed, the gain increases by 1 dB.
[GAIN DOWN]
Each time this button is pressed, the gain decreases by 1 dB.
Enabled only when [GAIN] switch
Setting from -3dB to +24dB is possible.
12
AUTO
MANUAL
GAIN
SHUTTER
3
4
3
and
4
operations are
1
is set to [AUTO].
is set to [MANUAL].
1
OUTPUT LEVEL
WHITE BALANCE
AUTO
MANUAL
AUTO
CAMERA
SETTING
ADJUST
RED
GAIN
SHUTTER
4
SHUTTER UP/SHUTTER DOWN button
Using the [SHUTTER UP] / [SHUTTER DOWN] button, the
following setting is possible: 1/60, 1/100, 1/175, 1/250, 1/375,
1/500, 1/1000, 1/2000, 1/4000, 1/10000.
Enabled only when [GAIN] switch
•
When looking at the picture on the monitor while the
electronic shutter is being used, the object movement
appears to be discontinuous.
For example: in shutter speed of 1/2000 sec. Since the
image for 1/2000 sec is taken out every 1/60 sec, this
phenomenon occurs.
•
When high-speed shutter is used, light may not be suffi-
cient.
MENU SETTING
POWER
MANUAL
ON
OFF
ON
I
BLUE
ENHANCE
FREEZE
BAR
OFF
O
is set to [MANUAL].
1
Advertisement
Table of Contents
