Operation; Top Burner Controls - Jade JTRH Series Installation & Operation Manual

TOP BURNER CONTROLS

To include, but not limited to:
• Open Burners
• Hot Top Burners
• French Top Burners
• Manual Griddle Burners
• Char Broiler Burners
• Robata/Satay Burners
• Plancha Burners
O
F
F
Figure 11(a): Conventional Top Controls
OFF
Figure 11(b): Thermostatic Top Controls
Range Top Controls
1. Check that pilot lights are lit.
2. Turn valve to ON position. (Burner will light.)
3. Adjust flame to desired height.
4. To turn off, move control to the OFF position.
IO-12

OPERATION

Broiler Top Controls
1. Check that pilot lights are lit.
2. Turn valve to ON position. (Burner will light.)
3. Adjust flame to desired height.
4. To turn off, move control to the OFF position.
Griddle Top Controls
(Conventional Controls)
1. Check that pilot lights are lit.
2. Turn valve to ON position. (Burner will light.)
3. Adjust to desired heat.
4. To turn off, move control to the OFF position.
Griddle Top Controls
(Thermostatic Control Option)
NOTE: Titan appliances with thermostatic griddle
controls require special attention at time of original
setup. (BJ thermostat by-pass adjustment)
1. Check that pilot lights are lit.
2. Turn valve to ON position. (Burner will light.)
3. Adjust to desired temperature, allow 10-15
minutes for temperature to stabilize.
Temperature should be +/-25 degrees of dial
setting.
4. To turn off, move control to the OFF position.
Plancha Top Controls
1. Check that pilot lights are lit.
2. Turn valve to ON position. (Burner will light.)
3. Adjust to desired temperature.
4. To turn off, move control to the OFF position.
Hot Top Range Controls
1. Check that pilot lights are lit.
2. Turn valve to ON position. (Burner will light.)
3. Adjust to desired temperature.
4. To turn off, move control to the OFF position.
TM
Titan Series Heavy Duty Range
Model Series JTRH & JTRHE
Jade Range LLC – A Middleby Company