Top Burner Adjustment; Oven, Griddle And Hot Top Burner Adjustment (Tubular Type Burners) - Jade JTRH Series Installation & Operation Manual

Top Burner Adjustment

1. Remove top burner control knobs.
2. Remove front manifold cover plate
3. Loosen the screw on the air shutter.
4. Light the burners and observe the quality of
the flame. Flame should be sharp, well defined,
two-tone blue as shown in Figure 7(A).
5. Adjust the air shutter as required.
6. Tighten screw on the air shutter.
7. Repeat procedure for all remaining burners.
8. Replace front manifold cover plate once all
burners are properly adjusted.
9. Replace burner knobs.
NOTE: When using LP (liquid petroleum/propane)
the flame may have a slight yellow tip, however
the yellow tip should be no greater than 10% the
overall flame size as shown in Figure 7(B).
Figure 9: Top Burner Air Shutter Adjustment
Jade Range LLC – A Middleby Company
Titan
Model Series JTRH & JTRHE
Oven, Griddle and Hot Top Burner
Adjustment (Tubular Type Burners)
1. Remove kick plate (for oven). Remove front
manifold cover (for Griddle/Hot Tops).
2. Loosen the screw on the air shutter.
3. Light the burner and observe the quality of the
flame. Flame should be sharp, well defined,
two-tone blue as shown in Figure 7(A).
4. Adjust the air shutter as required.
5. Tighten the screw on the air shutter, replace
covers/knobs/panels as required.
NOTE: When using LP (liquid petroleum/propane)
the flame may have a slight yellow tip, however
the yellow tip should be no greater than 10% the
overall flame size as shown in Figure 7(B).
djustment
Screw
Figure 10: Tubular Burner Air Shutter
Adjustment
TM Series Heavy Duty Range
Sleeve Type
ir Shutter
IO-11