Control Room Monitor Module - Harrison 950mx Overview

7.0 Control Room Monitor Module

Oscillator
The tone Oscillator provides 100hz, 1kHz and 10kHz sine-waves by selecting the appropriate
switch. The oscillator level is +4dBu. A fixed -20dB PAD switch is provided. The Oscillator has a
separate XLR output on the console rear and also can be assigned to any of the console bus
outputs.
Monitor Sources
Monitor source selection for the Main control room speakers and the Headphone output are
Mix Bus 1, Mix Bus 2, Aux 1-2 and for stereo send Aux 3L and 4R and an External input
provided via XLR connectors on the console rear.
Headphone Level Control
Controls the Headphone output level from mute to unity gain.
Main Speaker Controls
The MONITOR LEVEL knob controls the main speaker output level from mute to unity gain. It
also controls the level to the B monitor output via the MON B switch for use with a near-field or
secondary set of control room speakers. When an input channel has SOLO selected the yellow
LED lights on the Control Room Monitor module indicating there is a solo active on the
console. MONO combines the left and right monitor sources and MUTE mutes the Main
speakers and the Headphones.
Talkback Section
Talkback Mic level knob controls the level of the condenser microphone provided. The TALK
switch enables talkback to the assigned outputs on the Dual Mix Bus master module.
1/4" Headphone Jack
The headphone output shares the source, mono/stereo, mute, and solo settings of the Main
Speakers.
950mx analog console overview v1.5 Page 11