Table of Contents
Advertisement
If a VCR is connected to the VIDEO-1
terminal:
Set the VCR's remote control code to A
code.
If a DVD player is connected to the
VIDEO-1 terminal:
Set the DVD player's AV COMPULINK
MODE to DVD2.
If a VCR is connected to the VIDEO-2
terminal:
Set the VCR's remote control code to B
code.
If a DVD player is connected to the
VIDEO-2 terminal:
Set the DVD player's AV COMPULINK
MODE to DVD3.
If a DVD player is connected to the
VIDEO-3 terminal with a component
video cable:
Set the DVD player's AV COMPULINK
MODE to DVD1.
• For instructions on how to change the
device's setting, refer to the device's
instruction manual.
• If the device you are connecting has
neither the remote control code nor the
AV COMPULINK MODE, then connect
it to the TV's VIDEO-1 terminal.
Additional preparation
45
Advertisement
Table of Contents
