RuggedCom MediaConverter Installation Manual page 2

Copyright
COPYRIGHT © 2010 RuggedCom Inc. ALL RIGHTS RESERVED
Dissemination or reproduction of this document, or evaluation and communication of its contents, is
not authorized except where expressly permitted. Violations are liable for damages. All rights
reserved, particularly for the purposes of patent application or trademark registration.
This document contains proprietary information, which is protected by copyright. All rights are
reserved. No part of this document may be photocopied, reproduced or translated to another
language without the prior written consent of RuggedCom Inc.
Disclaimer of liability
We have checked the contents of this manual against the hardware and software described.
However, deviations from the description cannot be completely ruled out.
RuggedCom shall not be liable for any errors or omissions contained herein or for consequential
damages in connection with the furnishing, performance, or use of this material.
The information given in this document is reviewed regularly and any necessary corrections will be
included in subsequent editions. We appreciate any suggested improvements. We reserve the right
to make technical improvements without notice.
Registered Trademarks
Rugged MediaConverter™, ROS™ and RuggedMC™ are trademarks of RuggedCom Inc. Other
designations in this manual might be trademarks whose use by third parties for their own purposes
would infringe the rights of the owner.
Important:
The Rugged MediaConverter (RuggedMC ) contains no user-serviceable parts. Attempted
TM TM
service by unauthorized personnel shall render all warranties null and void.
Warning: Changes or modifications not expressly approved by RuggedCom Inc. could void the
user's authority to operate the equipment.
The RuggedMC should be installed in a restricted access location where access can only be
TM
gained by service personnel or users who have been instructed about the reasons for the
restrictions applied to the location and about any precautions that shall be taken; and access is
through the use of a tool or lock and key, or other means of security, and is controlled by the
authority responsible for the location.
2
RuggedCom RuggedMC™ RMC Installation Guide rev105
®